Saturday 13 October 2012

Preventive Maintenance and checklist


HV END CONNECTOR
Preventive maintenance checklist  
                                                 

 Why Perform Preventive Maintenance on Electrical Systems 

During the winter and summer months, power requirements are higher for many industries as facilities struggle to keep buildings warm and their assets in operation. In addition, in today's economic environment, facility and plant managers also struggle with efforts to lower power consumption in order to reduce expenses.

 Reasons to Perform Electrical Preventive Maintenance

 

THERE IS SAYING ‘A STITCH IN TIME SAVES NINE.’

1.       Avoid electrical shorts that cause fires: Electrical short circuits can occur when wires are overloaded with current, wires are exposed and load imbalances. This can cause excessive heat build-up, arcing or explosions.
2.       Identify loose connections: Loose connections can cause power fluctuations to devices, devices to operate erratically and uneven load distribution between wires.
3.       Identify components running hot or not according to specifications: Transformers, motors, bearings and wires almost always run hot before they fail. Predictive maintenance technologies such as infrared Thermography, vibration analysis and laser alignment tools as well as general maintenance such as regularly scheduled lubrication can avoid asset failure.
4.       Identify unusual smells, noises, dust build up, or discoloration: Melting insulation, stressed motors, corrosion through dust and so on make a physical inspection a requirement for electrical components. Electrical troubleshooting and simulation should be performed using a systematic approach.
5.       Check all emergency lighting, signage and power indicator displays: Many electrical disasters occur when the safety monitoring equipment itself is faulty leading to a false belief that all is ok.
6.       Extend the useful lifecycle of assets: Poorly maintained assets require more energy to do the same amount of work. This leads to excessive wear and tear and a shortening of the assets useful lifecycle.
7.       Avoid unplanned downtime: Unplanned downtime can shut down production, result in emergency labour costs and unnecessary capital asset replacement. Without proper electrical training, all of these significantly impact the profitability of the organization.
8.       Less equipment loss: Consistent electrical preventive maintenance will reduce the amount of equipment that needs to be replaced early as a result of electrical problems.
9.       Energy savings: Optimal energy efficiency will occur when equipment is functioning within design parameters and is well maintained.
10.    Safety and Liability: The most important reason of all is safety. Avoiding serious injuries or death is worth every penny spent on prevention. Liability lawyers have a field day when facilities have a poor maintenance record.

 

How Often Should Electrical PM be done?

 

TRANSFORMER LV BUSHING
                    
Electrical systems should have a thorough inspection by a qualified electrician. The frequency –quarterly, half yearly, annually, bi-yearly so on. It depends on the service of the equipments and decision should be taken by section head.  Individual assets should be inspected according to manufacturer directions or based upon experience and industrial training in a particular environment. For example, some motors may need to be inspected quarterly, air handlers annually and so on. Preventive maintenance, inspections and work orders are best handled using your own excel sheet or specialised software for the scheduling and recording of activity, results and notes.

Preventive maintenance of electrical systems goes beyond the visual or scheduled predictive maintenance work. A full electrical PM is a complete look at the electrical system including;

Sample Electrical PM Items

o    Compliance to safety audit recommendation
o    Re-torque connections
o    Checking panel boards
o    Inspecting control logic/scheme/PLCs for effectiveness
o    Examining work orders as well as new installs for compliance and uniformity
o    Making sure lock-out tags are in place
o    Inspection of heating and cooling units
o    Lighting
o    Shutdown mechanisms
o    NEC code compliance

Electrical inspection checklists and resources


Every organization has a unique set of assets. Therefore, it is unlikely that the same electrical inspection checklist will be the same. Generally manufacturer provides the checklist for maintenance it should be adhere to or with own practice we can develop ourselves.
GENERAL ANNUAL CHECKS
(1) Review past maintenance records to find repair patterns. These records may point to certain components that should be closely inspected during performance of preventive maintenance.
(2) Review operator records concerning electrical load readings; compare with equipment ratings. Operator records regarding operating temperatures and any documented abnormal circumstances associated with the system should also be reviewed.
(3) Inspect Secondary Electrical Distribution Equipment:
(a) Inspect to ensure that warning signs exist. Replace as required.
(b) Inspect enclosures for damage, unauthorized openings, and corrosion of metallic objects. Repair and paint as required.
(c) Inspect air passages and remove any blockage.
(d) Inspect, investigate, and solve conditions for unusual odors.
(e) As equipment is operated and tested, listen, investigate, and solve conditions for unusual noises.
(f) Inspect electrical connections for degradation and tightness. Repair as required.
(g) Inspect electrical insulation for discoloration and degradation. Repair as required.
(h) Inspect equipment grounding components such as conductors and connections. Repair as required.
(i) Inspect insulators for damage. Replace as required.
(j) Inspect liquid immersed equipment for leaks and damage.
(k) Inspect indicating lights for correct illumination.
(4) Remove debris, dirt, and other foreign objects from all components, housings, cabinets, panels, etc. 
(5) Torque all electrical connections to design value.. 
(6) Verify operation of space heaters and control thermostat. Check thermostat set point for proper setting. 
(7) Verify the grounding of the equipment and associated neutral where applicable.
(8) Conduct infrared test on all main current carrying equipment for hot spots that may indicate overload conditions or loose connections. 
(9) Using calibrated test instruments, calibrate ammeters, voltmeters, etc.  Verify continuity of metering selector switch contacts with ohmmeter. 
Sample
Check List for Transformer Maintenance
Date:                                      
Substation No:                                               
Transformer No:                                                          Voltage Ratio:                                    

Slno
Activities
Checks carried
Remarks
1
Obtain LC from Sub-station Operation


2
Check for oil leakages


3
Check for oil level in the conservator tank is up to 3/4th mark


4
Check for Breather condition


5
Check for Silica Gel condition


6
Clean the body


7
Open the terminal box check the following
a)      Tightness of terminal connection
b)      Condition of bushings
c)      Any sign of overheating.


8
Check for any unplugged opening, missing bolts


9
Check all terminal box tightness


10
Check oil/winding temperature setting


11
Check earthing system is proper & intact


12
Check cable support


13
Check IR value
a) Primary         : P-E
b) Secondary     : P-E


14
Any other abnormality





Signature


Check List for Switch Board Maintenance
Date:                                      
Substation No:                                               
SWB No:                                                                         Rating:                              

Slno
Activities
Checks carried
Remarks
1
Obtain LC from Sub-station Operation


2
Ensure isolation of the Incomer and Bus coupler breaker and control supply and Heater supply of the section


3
Ensure all back feeding sources are isolated


4
Remove all breakers/modules and PT Cubicles (If it is draw able type)


5
Open the top and side covers of the busbar chamber.


6
Clean the busbar chamber, breaker rear and front compartment with air blower, vacuum cleaner and dry cloth.


7
Clean all insulators by soft dry cloth & contact Cleaner.
Check for cracks, damages & replace the defective one.


8
Check and tighten the exposed joints of the busbar. Check for any signs of heating.


9
Check and tighten the power connections of CT/ PT  and out going cables.


10
Check for any unplugged opening, missing bolts


11
Box up busbar chamber & rear compartments of breaker.


12
Check earthing system is proper & intact


13
Check IR value
a) R-E       b) Y-E    c)  B-E


14
Any other abnormality




Signature



27 comments:

  1. When your business depends on electrical machinery and equipment for increased productivity and improved cash flow, it is extremely important to keep that machinery inspected and well-maintained on a regular basis. Preventive electrical equipment maintenance done regularly by trained, professional and experienced electrical workers helps to detect electrical problems before they become serious issues. By scheduling routine maintenance checks that utilize advanced technology and expert electrical skills, the industrial equipment and machinery on which your business runs can continue working efficiently, reducing the risk of a catastrophic failure that can cost time and money. Read on to learn the benefits of preventive electrical equipment maintenance, as well as the use of infrared thermography in detecting electrical problems.

    Save Time and Money:
    An effective preventive electrical maintenance program involves scheduling routine inspections and checkups on a regular basis, ensuring that your equipment and machinery is continually checked for both minor and major problems. Even small electrical problems can become more severe issues if left undetected for too long, which can lead to emergency repairs that require halted production lines and costly replacement parts. In a challenging global economy that demands cost-effective mass production on a timely basis, stopping production due to equipment failure can have major setbacks.

    A Safer Workplace:
    Not only can preventive electrical maintenance save businesses time and money, but by keeping equipment functioning properly, the risk of hazard is greatly reduced and the work environment becomes a safer place. Electrical equipment failure can lead to serious hazards, including fires and arc flash, which can leave workers severely injured. Equipment that is not working properly or problems that are left undetected can have unfortunate results for electricians working with or near the equipment. Machinery should be inspected frequently to identify potential problems and prevent them from becoming dangers in the workplace.

    Using Infrared Thermography:
    The use of infrared (IR) thermography is critical to preventive maintenance in electrical work environments. All objects radiate thermal energy, or heat, and IR cameras can detect the radiation of heat that is emitted from any given object by taking "heat" images. Through a range of colors, these images present hot spots that cannot otherwise be perceived by the naked eye. IR thermography is used to reveal loose circuits, equipment failure and safety hazards. Electrical workers can then use the thermographic images to analyze and measure temperatures, identifying problems and fixing them before they become severe.


    Mark from Electrical Maintenance

    ReplyDelete
  2. I am happy to find your distinguished way of writing the post. Now you make it easy for me to understand and implement the concept. Thank you for the post.
    air conditioning repair tampa

    ReplyDelete
  3. Thanks for this great post, i find it very interesting and very well thought out and put together. I look forward to reading your work in the future.
    home inspector tampa fl

    ReplyDelete
  4. Electrician Perth, KNP Electrics offer a range of Electrical Services to Perth & surrounding suburbs. With a range of products for Commercial or your Home
    switchboard maintenance

    ReplyDelete
  5. commercial electrician Perth
    KNP Electrics is a Perth Electrical Contractor that strives to provide the highest of quality in electrical work in both the domestic and commercial divisions. We are committed to providing reliable, efficient and prompt electrical services by offering high quality workmanship in every job we undertake.

    ReplyDelete
  6. Super site! I am Loving it!! Will return once more, Im taking your food likewise, Thanks. camping generators

    ReplyDelete
  7. Needed to compose you a very little word to thank you yet again regarding the nice suggestions you’ve contributed here.
    nebosh course in chennai

    ReplyDelete
  8. Very good paper, it was so useful

    ReplyDelete
  9. I want to share a testimony on how Le_Meridian funding service helped me with loan of 2,000,000.00 USD to finance my marijuana farm project , I'm very grateful and i promised to share this legit funding company to anyone looking for way to expand his or her business project.the company is UK/USA funding company. Anyone seeking for finance support should contact them on lfdsloans@outlook.com Or lfdsloans@lemeridianfds.com Mr Benjamin is also on whatsapp 1-989-394-3740 to make things easy for any applicant. 

    ReplyDelete
  10. I now own a business of my own with the help of Elegantloanfirm with a loan of $900,000.00 USD. at 2% rate charges, at first i taught with was all a joke until my loan request was  process under five working days and my requested funds was transfer to me. am now a proud owner of a large business with 15 staffs working under me. All thanks to the loan officer Russ Harry he is a God sent, you can contact them to improve your business on.. email-- Elegantloanfirm@hotmail.com.

    ReplyDelete
  11. I would highly recommend Le_ meridian funding services to any person in need financial help and they will keep you on top of high directories for any further needs. Once again I commend yourself and your staff for extraordinary service and customer service, as this is a great asset to your company and a pleasant experience to customers such as myself. Wishing you all the best for the future.Le meridian funding service is best way to get an easy loan,here is there email..lfdsloans@lemeridianfds.com Or talk to Mr Benjamin On WhatsApp Via_+1-989-394-3740 Thank You for helping me with loan once again in my sincerely heart I'm forever grateful.

    ReplyDelete
  12. The blog article very surprised to me! Your writing is good. In this I learned a lot! Thank you! Welcoem go to site
    download tik tok videos

    ReplyDelete
  13. Wow what a great post.It provides a brief information about General Maintenance. But if you are looking for the Services in UAE . Visit us at yellowpages.ae

    ReplyDelete
  14. Wow what a great post.It provides a brief information about General Maintenance. But if you are looking for the Services in UAE . Visit us at yellowpages.ae

    ReplyDelete
  15. Thank you so much for sharing really superb information with us. i would like to bookmark your blog for upcoming posts.
    general maintenance company in Dubai

    ReplyDelete
  16. Very impressive write up on maintenance. Thanks for sharing this useful knowledge to all.

    ReplyDelete
  17. Water-resistant our wales in advance of when numerous planking. The particular wales surely are a selection of heavy duty snowboards that this height ones would be the same in principle as a new shell planking having said that with much more height to help you thrust outward in the evening planking. planking Free spirit e class

    ReplyDelete
  18. Thanks for sharing this blog.It's Very Useful for me.
    Good to hear you.Thanks for sharing this informative blog.
    Trutech Products is leading the Best Transformer Manufacturers in Mumbai at the best cost Visit Us For:
    Transformer Manufacturers in India
    Transformer Manufacturers in Mumbai

    ReplyDelete
  19. I have read your blog it is very helpful for me. I want to say thanks to you. I have bookmark your site for future updates. Unterhaltsreinigung Göttingen

    ReplyDelete
  20. When you use a genuine service, you will be able to provide instructions, share materials and choose the formatting style. kitchen faucets singapore

    ReplyDelete
  21. There are a few fascinating points at some point in this post but I do not determine if I see all of them center to heart. There is some validity but I most certainly will take hold opinion until I take a look at it further. Good write-up , thanks so we want much more! Added to FeedBurner also maintenance

    ReplyDelete
  22. I really thank you for the valuable info on this great subject and look forward to more great posts. Thanks a lot for enjoying this beauty article with me. I am appreciating it very much! Looking forward to another great article. Good luck to the author! All the best! Unterhaltsreinigung Moringen

    ReplyDelete
  23. Businesses need to make sure that they have proper insulation in order to reduce costs and create a safe environment for both employees and customers to be in.

    Insulation Specialist Perth

    ReplyDelete
  24. This is why we only partner with responsible breeders who ensure puppies and kittens.
    Healthy, behaviorally stable and well cared for so they are fit and healthy
    The greatest joy comes when they join you as a new member of the family.

    ReplyDelete

One Nation, One electrical License

Electrical contractors are facing license problem when they bid for another state. Generally they are entitled to do work in particular stat...