Sunday 16 June 2013

Indian standard for electricity


Indian standard for electricity
Sr.
Standard no.
Description
1
IS 732-1963
Code of practice for Electrical Wiring installations (system Voltage not  exceeding 650 Volts)
2
 IE RULE 1956 / 50
Medium pressure wiring

3
IE RULE 1956 / 51
Regarding Medium and High pressure wiring
4
IE RULE 1956 /
32(1)(2)
Identification of earthed and Neutral conductors
5
 IE RULE 1956 / 51(1)
6Fixed type metallic boxes
6
IS 375-1963
® Marking and arrangement for switch-gear bus bars, main connections and auxiliary wiring
7
IE RULE 1956 / 33
Earthed termination on consumer premises
8
IE RULE 1956 / 33
Connection with Earth.

9
IE RULE 1956 / 33
Connection with Earth
10
IS 347 / 1952
Varnish Shellac for general purposes
11
IS2309 /  1969
Code of practice for the protection of buildings And allied structures against lightning.
12
IS RULE 1956
Safety procedure.
13
IS CODE 5216 / 1969
Guide for safety procedures and practice in Electrical works.

14
IS 1954 (Part-
I)1976
For working voltages upto and including 1100 Volts
15
IS 1954(Part-
II)1967
For working Voltage from 3.3 KV up to and including 11 KV.

16
IS 692-1973
Paper insulated lead sheathed cables for electricity supply.
17
IS 732-1963
Code of practice for electrical wiring installations (System voltage not exceeding 650 Volts).
18
IS 3961 (PARTII)
1967
Paper insulated lead sheathed cables.
19
IS 3961 (PARTII)
1967
PVC insulated and PVC sheathed heavy duty cables
20
IS 5819--1970
Recommended short circuit rating of high voltage PVC cables.
21
IS 1255-1967
Code of practice for installation and maintenance of Paper insulated power cables ( up to & including 53 KV).
22
 IS 1255-1967
--do—Section II
23
IS 2713 - 1964
Tubular steel poles for O.H. Lines
24
IS 705-1970
Reinforced concrete poles for OH power & Telecommunication lines.
25
IS 876-1970
Wood poles for O.H power and Telecommunications lines.
26
IS 1678-1960
Pre-stressed concrete poles for OH power, traction and
Telecommunications lines.
27
IE RULE 1956/76
Strength of Supports.
28
IE RULE 1956/90
Earthing of poles
29
IS 2141-1979
Galvanized stay strand.
30
IS 1445-1966
Porcelain Insulators for O.H. power lines (below 1000 V)
31
IS 731/1971
Porcelain Insulators for overhead lines (3.3 KV and below).

32
IE RULE 88
Repairing Guard Wire
33
IS 398-1961
Hard drawn stranded "A" and steel-cord "A" conductors for over head power transmission purpose.
34

-do-(Part 8) ---do--

IS 3070-1974 PART(I)

Non-Linear resistor types lighting arrestors
35
IS 3070-1966
Expulsion type Lighting Arrestors.

( PART II)

36
IE RULE 92
Regarding Earthing the lightning arrestors
37
IE RULE 77
Clearance above ground of the lowest conductor
38
IE RULE 79
Clearance from building of low and medium voltage
lines and service lines


--do-- 80 --do—of high & extra high


--do—81 Conductors at different voltage on same supports


--do-- 86 Conditions to supply where Telecommunications lines
and power lines are carried on same supports


--do—87 Lines crossing or approaching each other.
39
IS 2551-1963
Danger Notice Plates.
40
IS 270-1962
Galvanized steel barbed wire for fencing
41
IE RULE 76
Guard of service Line
42
IS 1255-1967
Care of practice for installation and maintenance of paper
insulated power cables (up to and including 33 KV
Section 11.7).
43
IS 429-1954
Methods for testing weights and uniformity of coating on Galvanized iron and steel wires and steel sheets.



No comments:

Post a Comment

SOP, Standard Operating Procedures

  1.1 .    Definition SOP is termed commonly as Standard Operating Procedures- SOP  Characteristics of SOP- 1)     Carry out the operati...